FuriBee FX120 120mm Brushless Micro FPV Racing Drone Review Micro FPV racers are all the rage. Able to be flown in smaller areas than their bigger brothers, but without sacrificing performance. These tiny little machines put amazing speed, and agility right in the palm of your hand. The new FX120 from FuriBee is no exception, and comes very well equipped with a Flysky FS-i6 in the RTF package or as an ARF ready for your choice of radio system. Let's take a closer look at this micro racer and see just what it's made of. I want to point out that in my pictures the quad has GemFan 3030 props on it that I was testing a few settings with. The quad comes stock with two complete sets of 3045 tri-blade props. I also want to mention that in the description on the Gearbest product page it states that a 2s 7.4v lipo is included, when in fact the included battery is a 3s 11.1v 620mah lipo. The battery stated in their description is a typo. Out of the box the quad is a smooth, stable flyer, and has Angle/Horizon/Acro flight modes pre programmed for you on SWC. Be aware though that unlike many other pre-programmed models the flight modes are reversed. Switch in the upper most position is Acro, in the middle is Horizon, and down is Angle mode. I found that the stock settings in CleanFlight were a little on the sluggish side for my liking. If you're just stepping into a brushless racer they're probably ok, but I went ahead and bumped the RC Rates up to 0.50 across the board. This made the quad feel much more responsive to me, and increased the yaw rate which to me was just too slow with the stock settings. Below are some detailed pics of the quad. I will add some flight video and some more information after I spend a little more time with it, and get a chance to get it outside for some action. Main Features: - Self-balancing, semi self-balancing, and manual mode are available for players in different levels - 120mm carbon fiber frame 2mm thick - This ready-to-fly version does not require any assembly and debugging - The latest F3 flight controller + 4 in 1 BLHeli 20A ESC + AIO FPV Camera ( with RaceBand coverage ) - Supports 2-6S, Oneshot125 and BLHeli Suite settings - 1306 3100KV Motor input voltage 2-3s
0 Comments
|
Archives
June 2022
|